04.12.2008 Thursday

Turning Milling Threading Parting,Grooving Drilling Brazing Carbide Tips Drawing Dies&Nibs Hard Metal Rods All 5 results10 results25 results50 results100 results Tools and Inserts for DRILLING   Toolsr(Index) Inserts(Index) Cutting Data Standart Values Grade Overview Cutting Data Standart Values   Main groups of material and their characteristic letters Brinell hardness HB Feed f (mm/rev.) Cutting Speed vc=m/min Diameter of hole (mm) Material <25 25-40 >40 R331 SB40 P Unalloyed steel1) ca 0.15 % C annealed 125 0.05-0.1 0.08-0.2 0.1-0.25 200-300 100-160 ca 0.45 % C annealed 190 0.05-0.1 0.08-0.2 0.1-0.3 200-300 100-160 ca 0.45 % C hardened and temp. 250 0.05-0.1 0.08-0.2 0.1-0.3 180-300 100-160 ca 0.75 % C annealed 270 0.05-0.1 0.08-0.2 0.1-0.3 180-280 100-160 ca 0.75 % C hardened and temp. 300 0.05-0.1 0.08-0.2 0.1-0.3 150-250 100-160 Low-alloy steel1) annealed 180 0.05-0.12 0.08-0.25 0.1-0.3 180-300 100-140 hardened and temp. 275 0.05-0.12 0.08-0.25 0.1-0.3 150-250 100-140 hardened and temp. 300 0.05-0.1 0.08-0.2 0.1-0.3 120-250 100-140 hardened and temp. 350 0.05-0.1 0.08-0.2 0.1-0.3 120-220 100-140 High-alloy steel 1) annealed 200 0.05-0.14 0.08-0.25 0.1-0.3 150-300 100-140 hardened and temp. 325 0.05-0.1 0.08-0.2 0.1-0.3 120-250 100-140 Stainless steel1) ferritic/martensitic,annealed 200 0.05-0.1 0.08-0.2 0.1-0.3 120-300 100-140 martensitic, hardened and temp. 240 0.05-0.1 0.08-0.2 0.1-0.3 120-300 100-140 M Stainless steel 1) austenitic 2), quenched 180 0.05-0.1 0.08-0.2 0.1-0.25 120-250 80-120 1) and cast steel 2) and austenitic / ferritic