05.02.2012 Sunday

Turning Milling Threading Parting,Grooving Drilling Brazing Carbide Tips Drawing Dies&Nibs Hard Metal Rods All 5 results10 results25 results50 results100 results Tool and Indexible Inserts for MILLING   Tools (Index) Inserts (Index) Chucking Tools (Index) Tool Range ISO Designation Sytem Cutting Data Standart Values Grades Overview Cutting Data Standart Values   Face Milling: R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) Shell End Milling: R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) End Mill : R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) Main workpiece material groups and their characteristic letters Brinell Hardness HB R2414(LC610M) fz = mm Preferable Method=Wet Workpiece material 0.8-0.15 0.16-0.35 0.36-0.5 P  Unalloyed steel1) ca 0.15 % C annealed 125       ca 0.45 % C annealed 190       ca 0.45 % C hardened and temp. 250       ca 0.75 % C annealed 270       ca 0.75 % C hardened and temp. 300       Low-alloy steel 1) annealed 180       hardened and temp. 275       hardened and temp. 300       hardened and temp. 350       High-alloy steel and high-alloy tool steel 1) annealed 200       hardened and temp. 325       Stainless steel1) ferritic/martensitic,annealed 200       martensitic, hardened and temp. 240       M Stainless steel1) austenitic 2) 180       K Grey cast iron perlitic/ferritic 180 160 100 90-180 perlitic (martensitic) 260       Nodular graphite cast iron ferritic 160       perlitic 250       Malleable cast iron ferritic 130       perlitic 230       N Aluminium wrought alloys unhardenable 60 1200 900 700 hardenable/hardened 100 900 600 400 Aluminium cast alloys <= 12% Si. unhardenable 75 1000 700 500 <= 12% Si. hardenable/hardened 90 700 500 300 >12% Si. unhardenable 130 500 300 250 Copper and copper alloys (Bronze/Brass) Free cutting alloys Pb>1% 110 550 250 200 Brass, red bronze 90 450 220 150 Bronze, non leaded copper and electrolytic copper 100 400 200 100 Nonmetallic materials Duaroplastics, Fibre reinforced plastics   100 80 60 sert kauçuk         S Heat resistant alloys Fe-based Ni or Co-based annealed 200       hardened 280       annealed 250       hardened 350       cast 320       Titanium alloys pure titanium Rm 3)400       alpha+beta alloys, hardened Rm 3)1050       H Hardened steel hardened and temp. 55HRC4)       hardened and temp. 60HRC4)       Chilled cast iron cast 400       Hardened cast iron hardened and temp. 55HRC4)       1) and cast steel 2) and austenitic/ferritic 3) Rm=tensile strength in N mm² 4) HRC=Rockwell hardness C = wet and dry machining = dry macihining = wet machining