06.01.2009 Tuesday

Turning Milling Threading Parting,Grooving Drilling Brazing Carbide Tips Drawing Dies&Nibs Hard Metal Rods All 5 results10 results25 results50 results100 results Tool and Indexible Inserts for MILLING   Tools (Index) Inserts (Index) Chucking Tools (Index) Tool Range ISO Designation Sytem Cutting Data Standart Values Grades Overview Cutting Data Standart Values   Face Milling: R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) Shell End Milling: R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) End Mill : R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) Main workpiece material groups and their characteristic letters Brinell Hardness HB HBF(LW611) fz = mm Workpiece material 0.8-0.15 0.16-0.35 0.36-0.5 P  Unalloyed steel1) ca 0.15 % C annealed 125       ca 0.45 % C annealed 190       ca 0.45 % C hardened and temp. 250       ca 0.75 % C annealed 270       ca 0.75 % C hardened and temp. 300       Low-alloy steel 1) annealed 180       hardened and temp. 275       hardened and temp. 300       hardened and temp. 350       High-alloy steel and high-alloy tool steel 1) annealed 200       hardened and temp. 325       Stainless steel1) ferritic/martensitic,annealed 200       martensitic, hardened and temp. 240       M Stainless steel1) austenitic 2) 180       K Grey cast iron perlitic/ferritic 180 150 120 90 perlitic (martensitic) 260 100 80   Nodular graphite cast iron ferritic 160 120 100   perlitic 250 100 70   Malleable cast iron ferritic 130 90 80   perlitic 230 80 70   N Aluminium wrought alloys unhardenable 60 700 600   hardenable/hardened 100 600 500   Aluminium cast alloys <= 12% Si. unhardenable 75 650 550   <= 12% Si. hardenable/hardened 90 500 400   >12% Si. unhardenable 130 300 200   Copper and copper alloys (Bronze/Brass) Free cutting alloys Pb>1% 110 400 300   Brass, red bronze 90 300 200   Bronze, non leaded copper and electrolytic copper 100 200 150   Nonmetallic materials Duaroplastics, Fibre reinforced plastics   80 60   Hard rubber         S Heat resistant alloys Fe-based Ni or Co-based annealed 200       hardened 280       annealed 250       hardened 350       cast 320       Titanium alloys pure titanium Rm 3)400       alpha+beta alloys, hardened Rm 3)1050 40     H Hardened steel hardened and temp. 55HRC4) 40 30   hardened and temp. 60HRC4)       Chilled cast iron cast 400       Hardened cast iron hardened and temp. 55HRC4)       1) and cast steel 2) and austenitic/ferritic 3) Rm=tensile strength in N mm² 4) HRC=Rockwell hardness C = wet and dry machining = dry macihining = wet machining