06.01.2009 Tuesday

Turning Milling Threading Parting,Grooving Drilling Brazing Carbide Tips Drawing Dies&Nibs Hard Metal Rods All 5 results10 results25 results50 results100 results Tool and Indexible Inserts for MILLING   Tools (Index) Inserts (Index) Chucking Tools (Index) Tool Range ISO Designation Sytem Cutting Data Standart Values Grades Overview Cutting Data Standart Values   Face Milling: R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) Shell End Milling: R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) End Mill : R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) Main workpiece material groups and their characteristic letters Brinell Hardness HB R645(LC435I) fz = mm Workpiece material 0.8-0.15 0.15-0.35 0.36-0.5 P  Unalloyed steel1) ca 0.15 % C annealed 125 140-190 100-140 80-120 ca 0.45 % C annealed 190 110-140 90-120 80-75 ca 0.45 % C hardened and temp. 250 100-130 90-120 80-75 ca 0.75 % C annealed 270 90-110 80-100 60-75 ca 0.75 % C hardened and temp. 300 70-80 65-70 55-70 Low-alloy steel 1) annealed 180 120-160 100-140 80-120 hardened and temp. 275 90-110 70-90 60-80 hardened and temp. 300 80-90 70-80 60-70 hardened and temp. 350 70-80 55-60 50-55 High-alloy steel and high-alloy tool steel 1) annealed 200 80-90 70-80 55-70 hardened and temp. 325 60-65 50-55 45-50 Stainless steel1) ferritic/martensitic,annealed 200 90-120 80-100 70-80 martensitic, hardened and temp. 240 80-90 70-80 60-65 M Stainless steel1) austenitic 2) 180 90-120     K Grey cast iron perlitic/ferritic 180       perlitic (martensitic) 260       Nodular graphite cast iron ferritic 160       perlitic 250       Malleable cast iron ferritic 130       perlitic 230       N Aluminium wrought alloys unhardenable 60       hardenable/hardened 100       Aluminium cast alloys <= 12% Si. unhardenable 75       <= 12% Si. hardenable/hardened 90       >12% Si. unhardenable 130       Copper and copper alloys (Bronze/Brass) Free cutting alloys Pb>1% 110       Brass, red bronze 90       Bronze, non leaded copper and electrolytic copper 100       Nonmetallic materials Duaroplastics, Fibre reinforced plastics         Hard rubber         S Heat resistant alloys Fe-based Ni or Co-based annealed 200       hardened 280       annealed 250       hardened 350       cast 320       Titanium alloys pure titanium Rm 3)400       alpha+beta alloys, hardened Rm 3)1050       H Hardened steel hardened and temp. 55HRC4)       hardened and temp. 60HRC4)       Chilled cast iron cast 400       Hardened cast iron hardened and temp. 55HRC4)       1) and cast steel 2) and austenitic/ferritic 3) Rm=tensile strength in N mm² 4) HRC=Rockwell hardness C = wet and dry machining = dry macihining = wet machining