06.01.2009 Tuesday

Turning Milling Threading Parting,Grooving Drilling Brazing Carbide Tips Drawing Dies&Nibs Hard Metal Rods All 5 results10 results25 results50 results100 results Tool and Indexible Inserts for MILLING   Tools (Index) Inserts (Index) Chucking Tools (Index) Tool Range ISO Designation Sytem Cutting Data Standart Values Grades Overview Cutting Data Standart Values   Face Milling: R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) Shell End Milling: R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) End Mill : R2624(LC225M) | R635(LC235I) | R645(LC435I) | R611(LC610E) | R2414(LC610M) | LW225 | SB40(LW240) | HBF(LW611) Main workpiece material groups and their characteristic letters Brinell Hardness HB R611(LC610E) fz = mm Workpiece material 0.8-0.15 0.16-0.35 0.36-0.5 P  Unalloyed steel1) ca 0.15 % C annealed 125       ca 0.45 % C annealed 190       ca 0.45 % C hardened and temp. 250       ca 0.75 % C annealed 270       ca 0.75 % C hardened and temp. 300       Low-alloy steel 1) annealed 180       hardened and temp. 275       hardened and temp. 300       hardened and temp. 350       High-alloy steel and high-alloy tool steel 1) annealed 200       hardened and temp. 325       Stainless steel1) ferritic/martensitic,annealed 200       martensitic, hardened and temp. 240       M Stainless steel1) austenitic 2) 180       K Grey cast iron perlitic/ferritic 180 140-280 110-210 70-160 perlitic (martensitic) 260 110-220 80-180 70-120 Nodular graphite cast iron ferritic 160 140-200 110-160 80-100 perlitic 250 130-160 100-130 70-80 Malleable cast iron ferritic 130 140-250 110-180 80-120 perlitic 230 130-180 100-150 90-90 N Aluminium wrought alloys unhardenable 60       hardenable/hardened 100       Aluminium cast alloys <= 12% Si. unhardenable 75       <= 12% Si. hardenable/hardened 90       >12% Si. unhardenable 130       Copper and copper alloys (Bronze/Brass) Free cutting alloys Pb>1% 110       Brass, red bronze 90       Bronze, non leaded copper and electrolytic copper 100       Nonmetallic materials Duaroplastics, Fibre reinforced plastics         Hard rubber         S Heat resistant alloys Fe-based Ni or Co-based annealed 200       hardened 280       annealed 250       hardened 350       cast 320       Titanium alloys pure titanium Rm 3)400       alpha+beta alloys, hardened Rm 3)1050       H Hardened steel hardened and temp. 55HRC4)       hardened and temp. 60HRC4)       Chilled cast iron cast 400       Hardened cast iron hardened and temp. 55HRC4)       1) and cast steel 2) and austenitic/ferritic 3) Rm=tensile strength in N mm² 4) HRC=Rockwell hardness C = wet and dry machining = dry macihining = wet machining