06.01.2009 Tuesday

Turning Milling Threading Parting,Grooving Drilling Brazing Carbide Tips Drawing Dies&Nibs Hard Metal Rods All 5 results10 results25 results50 results100 results Tools and Indexible Inserts for TURNING   Tools(Index) Inserts(Index) Tool Range ISO Designation System Cutting Data Standart Value Grades Overview Technical Information Geometries Cutting Data Standard Values   Ti410 | R331 | R645 | R2414 | LC610A | LC215B | Ti220 | LC225C | SB10 | SB20 | SB30 SB40 | HB10 | HB10S | BC710 | BC725 The cutting data standard values started are recommendations which have to be adapted to the operating conditions, due to variables such as tool lenght, machine condition, workpiece stability and coolant. See " Advice on machining problems " for optimization tips. Main workpiece material groups and their characteristic letters Brinell hardness HB R645 f = mm/dev Workpiece material 0.4-0.8 0.25-0.4 0.05-0.25 P  Unalloyed steel 1) ca 0.15 % C annealed 125 110-140 150-190 220-260 ca 0.45 % C annealed 190 90-120 140-170 200-240 ca 0.45 % C hardened and temp. 250 80-110 120-150 160-200 ca 0.75 % C annealed 270 70-90 100-130 120-160 ca 0.75 % C hardened and temp. 300 60-80 80-100 110-150 Low-alloy steel 1) annealed 180 90-120 140-180 170-200 hardened and temp. 275 70-100 130-160 160-200 hardened and temp. 300 65-90 110-150 120-160 hardened and temp. 350 60-70 80-95 100-130 High-alloy steel and High-alloy tool steel 1) annealed 200 70-100 110-140 150-180 hardened and temp. 325 65-80 90-120 100-150 Stainles steel 1) ferritic/martensitic,annealed 200 90-120 120-140 150-180 martensitic, hardened and temp. 240 80-100 110-130 120-160 M Stainles steel 1) austenitic 2) 180 70-90 100-140 120-160 K Grey cast iron perlitic/ferritic 180       perlitic (martensitic) 260       Nodular graphite cast iron ferritic 160       perlitic 250       Malleable cast iron ferritic 130       perlitic 230       N Aluminium wrought alloys unhardenable 60       hardenable/hardened 100       Aluminium cast alloys <= 12% Si. unhardenable 75       <= 12% Si. hardenable/hardened 90       >12% Si. unhardenable 130       Copper and copper alloys (Bronze-Brass) free cutting alloys Pb>1% 110       brass, red bronze 90       bronze, non leaded copper and electrolitic copper 100       Nonmetallic materials Duroplastics fibre reinforced plastics         Hard rubber         S Heat resistant alloys Fe-based Ni or Co-based annealed 200       hardened 280       annealed 250       hardened 350       cast 320       Titanium alloys Pure titanium Rm 3)400       Alpha and Beta alloys hardened Rm 3)1050       H Hardened steel hardened and temp. 55HRC4)       hardened and temp. 60HRC4)       Hardened steel cast 400       Hardened cast iron hardened and temp. 55HRC4)       1) and cast steel 2) ve austenitic/ferritic 3) Rm=Tensile strenght in N mm² 4) HRC=Rockwell hardness C ** Only for finishing fmax 0.1 mm/dev apmax 0.5 mm. * Only for hardness <= 200 HB. = wet or dry machine = Dry machining = Wet machining