06.01.2009 Tuesday

Turning Milling Threading Parting,Grooving Drilling Brazing Carbide Tips Drawing Dies&Nibs Hard Metal Rods All 5 results10 results25 results50 results100 results Tools and Indexible Inserts for TURNING   Tools(Index) Inserts(Index) Tool Range ISO Designation System Cutting Data Standart Value Grades Overview Technical Information Geometries Cutting Data Standard Values   Ti410 | R331 | R645 | R2414 | LC610A | LC215B | Ti220 | LC225C | SB10 | SB20 | SB30 SB40 | HB10 | HB10S | BC710 | BC725 The cutting data standard values started are recommendations which have to be adapted to the operating conditions, due to variables such as tool lenght, machine condition, workpiece stability and coolant. See " Advice on machining problems " for optimization tips. Main workpiece material groups and their characteristic letters Brinell hardness HB R2414 f = mm/dev Workpiece material 0.4-0.8 0.25-0.4 0.05-0.25 P  Unalloyed steel 1) ca 0.15 % C annealed 125       ca 0.45 % C annealed 190       ca 0.45 % C hardened and temp. 250       ca 0.75 % C annealed 270       ca 0.75 % C hardened and temp. 300       Low-alloy steel 1) annealed 180       hardened and temp. 275       hardened and temp. 300       hardened and temp. 350       High-alloy steel and High-alloy tool steel 1) annealed 200       hardened and temp. 325       Stainles steel 1) ferritic/martensitic,annealed 200       martensitic, hardened and temp. 240       M Stainles steel 1) austenitic 2) 180     **120-130 K Grey cast iron perlitic/ferritic 180     *80-250 perlitic (martensitic) 260       Nodular graphite cast iron ferritic 160     *70-200 perlitic 250       Malleable cast iron ferritic 130     *80-220 perlitic 230       N Aluminium wrought alloys unhardenable 60 500-2000 600-2500 700-3000 hardenable/hardened 100 200-1000 300-1500 400-2000 Aluminium cast alloys <= 12% Si. unhardenable 75 400-800 500-1200 600-1500 <= 12% Si. hardenable/hardened 90 300-600 400-900 500-1200 >12% Si. unhardenable 130 200-600 300-800 400-1000 Copper and copper alloys (Bronze-Brass) free cutting alloys Pb>1% 110 250-400 250-500 450-650 brass, red bronze 90 250-600 250-800 450-1000 bronze, non leaded copper and electrolitic copper 100 150-250 180-300 200-400 Nonmetallic materials Duroplastics fibre reinforced plastics   60-70 80-100 90-120 Hard rubber         S Heat resistant alloys Fe-based Ni or Co-based annealed 200       hardened 280       annealed 250       hardened 350       cast 320       Titanium alloys Pure titanium Rm 3)400       Alpha and Beta alloys hardened Rm 3)1050       H Hardened steel hardened and temp. 55HRC4)       hardened and temp. 60HRC4)       Hardened steel cast 400       Hardened cast iron hardened and temp. 55HRC4)       1) and cast steel 2) ve austenitic/ferritic 3) Rm=Tensile strenght in N mm² 4) HRC=Rockwell hardness C ** Only for finishing fmax 0.1 mm/dev apmax 0.5 mm. * Only for hardness <= 200 HB. = wet or dry machine = Dry machining = Wet machining