06.01.2009 Tuesday

Turning Milling Threading Parting,Grooving Drilling Brazing Carbide Tips Drawing Dies&Nibs Hard Metal Rods All 5 results10 results25 results50 results100 results Tools and Indexible Inserts for TURNING   Tools(Index) Inserts(Index) Tool Range ISO Designation System Cutting Data Standart Value Grades Overview Technical Information Geometries Cutting Data Standard Values   Ti410 | R331 | R645 | R2414 | LC610A | LC215B | Ti220 | LC225C | SB10 | SB20 | SB30 SB40 | HB10 | HB10S | BC710 | BC725 The cutting data standard values started are recommendations which have to be adapted to the operating conditions, due to variables such as tool lenght, machine condition, workpiece stability and coolant. See " Advice on machining problems " for optimization tips. Main workpiece material groups and their characteristic letters Brinell hardness HB LC225C f = mm/dev Workpiece material 0.4-0.8 0.25-0.4 0.05-0.25 P  Unalloyed steel 1) ca 0.15 % C annealed 125 150-200 210-300 255-410 ca 0.45 % C annealed 190 130-180 190-270 230-380 ca 0.45 % C hardened and temp. 250 100-150 130-210 150-255 ca 0.75 % C annealed 270 120-170 170-230 210-300 ca 0.75 % C hardened and temp. 300 90-140 110-170 150-200 Low-alloy steel 1) annealed 180 120-170 150-230 210-320 hardened and temp. 275 90-140 130-190 150-230 hardened and temp. 300 85-130 120-180 140-210 hardened and temp. 350 80-120 110-150 130-170 High-alloy steel and High-alloy tool steel 1) annealed 200 110-150 150-200 190-300 hardened and temp. 325 70-110 85-130 120-150 Stainles steel 1) ferritic/martensitic,annealed 200 120-150 140-200 190-240 martensitic, hardened and temp. 240 85-120 110-140 150-190 M Stainles steel 1) austenitic 2) 180 90-110 120-160 120-190 K Grey cast iron perlitic/ferritic 180       perlitic (martensitic) 260       Nodular graphite cast iron ferritic 160       perlitic 250       Malleable cast iron ferritic 130       perlitic 230       N Aluminium wrought alloys unhardenable 60       hardenable/hardened 100       Aluminium cast alloys <= 12% Si. unhardenable 75       <= 12% Si. hardenable/hardened 90       >12% Si. unhardenable 130       Copper and copper alloys (Bronze-Brass) free cutting alloys Pb>1% 110       brass, red bronze 90       bronze, non leaded copper and electrolitic copper 100       Nonmetallic materials Duroplastics fibre reinforced plastics         Hard rubber         S Heat resistant alloys Fe-based Ni or Co-based annealed 200       hardened 280       annealed 250       hardened 350       cast 320       Titanium alloys Pure titanium Rm 3)400       Alpha and Beta alloys hardened Rm 3)1050       H Hardened steel hardened and temp. 55HRC4)       hardened and temp. 60HRC4)       Hardened steel cast 400       Hardened cast iron hardened and temp. 55HRC4)       1) and cast steel 2) ve austenitic/ferritic 3) Rm=Tensile strenght in N mm² 4) HRC=Rockwell hardness C ** Only for finishing fmax 0.1 mm/dev apmax 0.5 mm. * Only for hardness <= 200 HB. = wet or dry machine = Dry machining = Wet machining