06.01.2009 Tuesday

Turning Milling Threading Parting,Grooving Drilling Brazing Carbide Tips Drawing Dies&Nibs Hard Metal Rods All 5 results10 results25 results50 results100 results Tools and Indexible Inserts for TURNING   Tools(Index) Inserts(Index) Tool Range ISO Designation System Cutting Data Standart Value Grades Overview Technical Information Geometries Cutting Data Standard Values   Ti410 | R331 | R645 | R2414 | LC610A | LC215B | Ti220 | LC225C | SB10 | SB20 | SB30 SB40 | HB10 | HB10S | BC710 | BC725 The cutting data standard values started are recommendations which have to be adapted to the operating conditions, due to variables such as tool lenght, machine condition, workpiece stability and coolant. See " Advice on machining problems " for optimization tips. Main workpiece material groups and their characteristic letters Brinell hardness HB SB10 f=mm/dev 0.1-0.4 SB20 f=mm/dev 0.1-0.4 SB30 f=mm/dev 0.1-0.6 Workpiece material P  Unalloyed steel 1) ca 0.15 % C annealed 125 180-300 170-280 150-250 ca 0.45 % C annealed 190 150-270 140-250 120-220 ca 0.45 % C hardened and temp. 250 120-180 110-160 90-130 ca 0.75 % C annealed 270 140-250 130-230 110-200 ca 0.75 % C hardened and temp. 300 110-180 100-160 85-130 Low-alloy steel 1) annealed 180 140-250 130-230 110-200 hardened and temp. 275 110-180 100-160 80-130 hardened and temp. 300 100-170 90-150 80-120 hardened and temp. 350 90-150 85-130 75-100 High-alloy steel and High-alloy tool steel 1) annealed 200 130-220 120-200 100-170 hardened and temp. 325 80-140 75-120 70-100 Stainles steel 1) ferritic/martensitic,annealed 200 140-220 130-200 120-170 martensitic, hardened and temp. 240 100-180 90-160 80-130 M Stainles steel 1) austenitic 2) 180       K Grey cast iron perlitic/ferritic 180       perlitic (martensitic) 260       Nodular graphite cast iron ferritic 160       perlitic 250       Malleable cast iron ferritic 130       perlitic 230       N Aluminium wrought alloys unhardenable 60       hardenable/hardened 100       Aluminium cast alloys <= 12% Si. unhardenable 75       <= 12% Si. hardenable/hardened 90       >12% Si. unhardenable 130       Copper and copper alloys (Bronze-Brass) free cutting alloys Pb>1% 110       brass, red bronze 90       bronze, non leaded copper and electrolitic copper 100       Nonmetallic materials Duroplastics fibre reinforced plastics         Hard rubber         S Heat resistant alloys Fe-based Ni or Co-based annealed 200       hardened 280       annealed 250       hardened 350       cast 320       Titanium alloys Pure titanium Rm 3)400       Alpha and Beta alloys hardened Rm 3)1050       H Hardened steel hardened and temp. 55HRC4)       hardened and temp. 60HRC4)       Hardened steel cast 400       Hardened cast iron hardened and temp. 55HRC4)       1) and cast steel 2) ve austenitic/ferritic 3) Rm=Tensile strenght in N mm² 4) HRC=Rockwell hardness C ** Only for finishing fmax 0.1 mm/dev apmax 0.5 mm. * Only for hardness <= 200 HB. = wet or dry machine = Dry machining = Wet machining