LC215K(HC-P15-HC-K15)
(Turbo Turning Grade)
Preferred grade for the highest cutting
speeds for light to medium turning work
on structural steel, alloyed steel and spheroidal
irons, even with occasionally interruped
cutting. Additional area of application;
also suitable for working grey cast iron.
[top]
LC225C(HC-P25-HC-M15)
(Global Turning Grade)
Main grade for machining steel materials
and easily machinable stainless steels at
medium cutting speeds. Including interruped
cutting work. This general purpose grade
is characterised by the properties of high
durability and excellent toughness across
a wide range of applications.
[top]
Ti220 (HC-P15-HCK15)
For turning at high cutting speeds with
medium depths of cut of steel and steel
castings, lowalloy and spheroidal cast iron.
Very high wear resitance, coating TiC-A1203
multilayer - TiN [top]
Ti240 (HC-P20-P40; HC-M20-M40)
For the machining of case-hardening steels,
heat-treated as well as rust and acid-proof
and high-temperature steels. Medium to heavy
cuts, coarse feeds as well as high speeds.
Coating TiC-A1203 multilayer - TiN
[top]
Ti410 (HC-K15)
Al2O3 multilayer coated
multipurpose grade for turning of short
chipping materials at high cutting speeds.
[top]
LC610A (HC-K10) (Diamond
coated)
High performance for plastic materials like
glass fibre and carbon fibre composites.
Also, for aluminium-silisyum alloys.
[top]
R2414 (HC-K10, HC-M10)
The ideal grade fan working aluminium materials
and other non-ferrous metals. Thank to a
very thin micropulse plasma CVD TiAIN coating.
It is also excellent for finish machining
of stainless steels and grey cast iron.
[top]
Main grades uncoated
SB10 (HW-P10)
Turning and copy turning in the small to
medium cutting and feed range. Very well
suited to thread peeling and thread cutting.
[top]
SB20 (HW-P20)
For turning in the medium cutting and feed
range, also at various cutting depths. also
suitable for peeling.
[top]
SB30 (HW-P30)
Rough turning at low cutting speeds, but
with large chip cross-sections and in difficult
conditions and interrupted cutting.
[top]
SB40 (HW-P40)
For rough turning at low cutting speeds,
but with large interruped cutting.
HB10 (HW-K10)
Classic hard metal grade for turning short-chipping
materials, standard grade for driling, countersinking
ad reaming steel. Also for channeling chilled
cast iron cylinders. [top]
HB10S (HW-K05-K15)
For turning chilled iron casting. grey cast
with spheroidal graphite and alloyed grey
cast iron as well as for aluminium and aluminium
alloys. Turning high grade and hardened
steels, also for austenitic manganese stells.
[top]
Cermet grades
CERMET
LT220 (P20, M20) Based on TiC(CN) and TiN, Cermet
LT220 combines the benefits of ceramics
and its properties, such as wear resistance,
hardness, oxidation resistance and high-temperature
resistance, and the advantages of metal
and its properties, such as impact strength
and tenacity. The result is outstanding
finish at high cutting speeds and consistent
dimensional accuracy.
[top]
BC710
CERMET (HT-P01-20, HT-K05-K10)
For
fine working and micro-finishing continuous
chip and short-chipping metarials at cutting
speeds and feed rates.
[top]
BC725
CERMET (HT-P05-320, HT-M05-20) For finishing and light rough
working of continous chip materials. High
cutting speeds and small to medium feed
rates and cutting depths.
[top]
Tools
and Indexible Inserts for TURNING
